vvvv
The Online Magazine For Amateur Boat Builders

new

home

indexes

classified

database

newsletter

contests

archives

contact

forum

store

links

 


River Runner 18 Launch

by James Hauer

(click images for larger views)

click to enlarge Here are a few shots of the completed River Runner18 and launch. It was launched this past Saturday on the Fox River.
click to enlarge This boat clips along very well with just a 2-1/2hp motor. It surprised everyone how little power was actually required to move this craft.
click to enlarge A little over half throttle, the boat peaks out at about 5 1/2mph. Set the throttle at barely over idle and the boat will move about 4mph. I think that one could run around all weekend with the built in pint gas supply.
click to enlarge

The boat spins on a dime using the oars and is very maneuverable despite its length. The short oars worked well. This boat will be a wonderful craft for float fishing.

Note part of my "Jonsboat" appears in a photo or two. I used it as the chase and rescue boat.

click to enlarge The owner was pleased.

Best,
jim

plans

media

supplies

sailmaking

hardware

tools

gear

sails